view cart menu separator categories menu separator faq
advanced search
categories  > PELC - Prop Electronics Light Control (2)
PPE PELC - Pack Prop Electronic Light Controller
2 images
PPE PELC - Pack Prop Electronic Light Controller
PPE PELC - Pack Prop Electronic Light Controller

PPE PELC - Pack Prop Electronic Light Controller

Price: $120.00 currently not available     
Feedback: n/a Ask seller a question
Shipping: US-Mainland: $15.00 (more destinations)
Seller's Country: Canada
Condition: Brand new
Payment with:
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
PPE - Pack Prop Electronics

The Pack Prop PELC kit contains three main components.
1- the PPLC "Pack Prop Light Controller"
2- the GDLC "Gun Display Light Controller"
3- the BAR14 bargraph adapter

1- PPLC section of the PPE kit.
Standalone, it will control the powercell 14-led display as well as the cyclic rotative 4-led ones. The 14-led display is on-board, and the 4-led can be added via connector.

It can be used standalone with switches and accepts the battery connector. Suggestion is made to add a general cut-off switch.

When configured in the PPE kit, will pass power to the GLDC unit and receive the signals from it. Can accept up to 10V but requires only 3 to 5.5V to function, anything extra will be wasted in power conversion. The power sent to the GLDC unit will be regulated at 8V max.

2- GDLC section of the PPE kit.
This is the hearth of the PPE kit. It could work standalone, but is intended to be the nevralgic center of your pack prop. All buttons from the gun section goes into it, outputing signals to the BAR14 and PPLC modules.
One of the little secret of the trades when it comes to prop guns is the high power LED for the barrel, which is also controlled by this module.

It also controls the sequences of all accessories LEDs you'll require for your GUN. Has extension for future development like sound module attachment and vibration motor.

3- BAR14 section of the PPE kit.
This module is ment to be used as an extension to the GDLC; it permits not only to place a bargraph away from the GDLC, but also to add resistors to it, controlling the current consumption of the bargraph trough the GDLC.

Also included
This kit also includes cables to connect the GDLC to the PPLC and BAR14 modules, LEDS to add inside the gun (no holders) and the power LED.


If you don't understand what this is, please do not order it.

Product comes "as-is" tested and working. If you have problem with shipping, please contact the parcel company. If you solder to the board and it stops working, we are sorry. This is intended for the fan/hobyist/enthusiast with minimal electronics knowledge and doesn't come with a warantee that you won't fry it.

please read our terms and agreements. If you do not agree, do not order. Thanks and have a nice day.

-1.73in X 3.94in PCB
-maximal height of components: +-14mm
-includes connector for battery
-includes connector for cyclic LED array (4)
-includes connector for GLDC that can be also converted to switch for standalone usage
-input voltage 3 to 10V
-output to 14 LED bargraph + extra cyclic LEDs.
-Future upgrade: sound connector output

-2.94in x 1.27in PCB
-maximal height of components: +-14mm
-Receives its power from the PPLC,
-Tolerated input voltage 3 to 10V
-5 input connectors (SWITCH)
-Output to 5LEDs and a 28-pin bargraph (BAR14 connector included)
-Features connector for vibration motor
-Future upgrade: sound connector input

-1in x 1.27in PCB
-maximal height of components: +-14mm
-Receives its power from the GDLC
-output to 14 LED bargraph.

this hardware has been know to work under more extreme conditions. However, doing so is out of the normal "safe" range of such hardware. If you decide to go the extreme route, it might fry the hardware. Do so at your own risks, but we cannot be held responsible for the end result.
Last Updated: 13 Apr 2009 11:34:16 PDT home  |  about  |  terms  |  contact
Powered by eCRATER - a free online store builder